How can flash and install a different dashboard for Huawei usb modems. (Dongles)
Hello friends. What is your usb modem?? Is it a huawei one??? Are you know how can flash it free??? This is easy. Try to do this. This is with 3 an easy steps.
2. Upgrade the firmware.
3. Install a different dashboard.
Reset your unlock counter.
Upgrading the firmware will not responded unlock counter which read 10 out of 10. We had to reset the counter using a software first. If you haven't entered your unlock code 10 times, you should skip this step.
1. Extract the zip file and run .exe file inside it.
2. Give a tick on Auto connection and Refresh.
3. Be sure Auto-calc code and Auto-Unlock modem are both
marked.
4. Click on READ MDM DATA
5. Now click unlock. This should both unlock and reset your
counter at the same time.
6. Now click CALCULATE to generate to flash code. remember it
as a password. You are gonna be needing it later.
6. Now click CALCULATE to generate to flash code. remember it
as a password. You are gonna be needing it later.
Upgrade your firmware modem..
1. First you must download the right firmware for your dongle.
There are two ways to do that. You can download it from there
official web site or dc files.com. I suggest dc files.com
2. Select Huawei or what model of your modem and click small
icon on right side it. Like this.
3. On the next page select your model number and click same
small icon.
4. Now download firmware and dashboard update. You have
successfully download your firmware. Now to upgrade
firmware unzip the file and run .exe file.
5. Accept the agreement and hit enter.
6. The program searches for your devices for some seconds.
7. On the next page hit enter.
8. When the flashing starts, be sure the following instructions. Do
not remove your modem and be sure you have enough power for
30 min.
9. When you hit start button, it ill be asked for a password. Enter
your flash code here. (as your password)
10. The program starts normally and it should take less than 10
minutes. Just wait till you see a message looks like below
screen shot.
11. Congratulations.. You have done firmware upgrade
successfully.
Installing a different dashboard...
12. It is here needing y dashboard update file downloaded above.
13. Unzip the file and run .exe file. Accept to agreement and hit
enter. Software should search for your device. All steps very
much similar to firmware update you did before this.
Okay.. Now you have done your work well. What about think?? This is the method for unlock to permanently locked modems. With 10 wrong unlock attempts and it will be worked fine. Enjoy. Share this link with your friends.
.jpg)
.jpg)
0 comments:
Post a Comment